Set the time on the Dukane MCS350 Public Address/Intercom System

Tim L.

Last Update 6 tháng trước

To enter System Programming mode, use the following procedure:
  1. Press SYSTEM to request the system programming mode. The ACC software flashes a message describing the current CCU software version. The ACC display then shows ACCESS CODE.
  2. Enter the access code. Press ENTER. If the correct codes are entered, the first entry of the main menu (SET CLOCK) is displayed and the SYSTEM key LED lights.
    If you are not sure of the access code, setup a technical support call with Dedicated Presentation Solutions.
  3. Press SELECT to display the current hour mode.
  4. Press NEXT to toggle between the 12- and 24-hour modes.
  5. Press SELECT to choose the hour mode currently displayed. Press NEXT to toggle between a.m. and p.m., then press SELECT to enter the time. The display is prompting for time to be entered in the format hhmm. HH is the hour and MM the minutes. If 24-hour mode was selected, enter the time in 24-hour format.
  6. Set the time. For example to set the system clock for 4:30 (a.m. or p.m., depending on what was selected), press 0, 4, 3, 0, then ENTER.
  7. Press EXIT to return to the system menu.



Still need help? Message Us